HDD, SSD, RAID, ATA… the list feels endless. There’s no shortage of acronyms in the…
By Mike Cobb, Director of Engineering
It’s a sad fact that all hard drives, every make and every model, will fail. And, it’s even more unfortunate that users keep making the same mistakes as they try to perform hard drive data recovery themselves.
Here are two of the most damaging mistakes people can make with hard disk drives (HDDs).
The Freezer Trick Doesn’t Work
If you search for hard drive data recovery tips on any search engine, you’ll find lots of suggestions, some good and some really bad, including ones that involve putting a broken hard drive in the freezer.
The science behind this suggestion is actually solid, but with the advancement of technology it’s no longer appropriate and should not be attempted. The potential for damage and/or data loss greatly outweighs any potential benefit.
Lowering the temperature of a drive can be used to counteract stiction (static friction), a situation that would cause a spinning hard drive to lock up due to lubricant failure. Cooling the equipment down in the freezer will cause the metal to constrict and, in some cases, free the disks in an HDD to spin. The idea is to save the data by quickly copying it to another device before another lockup occurs.
The big problem with the freezer trick is it only works if stiction is at fault. Modern and more complex HDDs have improved lubrication systems and “off-platter parking” to prevent this problem from occurring and, as a result, stiction rarely happens with today’s hard drive technology.
HDDs do not tolerate freezing temperatures very well. One side effect is corrosion, caused by the transformation of water vapor inside the hard drive to ice crystals. Upon removal from the freezer, that ice will melt and foul the delicate electrical components inside the hard drive. If the drive spins up before the ice has melted, catastrophic damage will occur and data may be permanently lost.
Don’t Open That Hard Drive
Hard drives are sealed at the factory to keep dust, dirt and airborne particulate matter from ruining the contents. If the factory seal is broken, even momentary exposure to the atmosphere could cause irreparable damage. A broken seal also invalidates any manufacturer’s warranty.
HDDs should only be opened in the same type of environment in which they were produced—a cleanroom laboratory.
DriveSavers engineers conduct HDD data recovery in a Certified ISO Class 5 Cleanroom, the safest and most secure environment for the hard drive data recovery process. We have been approved by all of the major HDD manufacturers to open their hard drives without voiding the warranty.
The safest and surest thing to do if you suffer a hard drive failure is to call the professionals at DriveSavers. We’re available for consultation 7 days a week at 800-440-1904.