RAID 5 Requirements: The 4 Essentials to Know

What are your options if you’re a small to medium business, or even a freelancer or consultant, and you can’t afford the upfront investment in high-capacity servers? Your drives still have to deliver fast reads and writes with plenty of storage space, but the price is simply too high. Depending on what you need, RAID 5 might be the answer. But what are the requirements for RAID 5?
What is a RAID?
Storage built on a Redundant Array of Independent Disks (RAID) is a great way to make the most of the performance of multiple hard drives. As we’ve explained previously, RAID configurations tap into the power of software and hardware so that a group of hard drives can work together. What you end up with is an affordable, high-performance data storage system.
RAID configurations differ, and each has its own pros, cons and requirements. Today the focus is on RAID 5, a popular choice that is relatively easy to put in place. A RAID 5 configuration gives you blazing-fast reads, and if a RAID 5 disk fails, recovering your data is possible. The reason is that the array splits data into tiny pieces and shares them out across the connected drives. This way of dividing and saving data is called parity.
Before you organise your hard drives into a RAID 5, there are a few things worth knowing. Each array needs specific conditions to perform well, and RAID 5 is the same. So what should you know before setting up a RAID 5 hard drive configuration?
The 4 RAID 5 Requirements to Know
RAID 5 requirement #1: the correct number of drives
How many physical disks does RAID 5 require? You can connect from three to 16 drives in a RAID 5 setup, with four being the most common choice.
Although three drives is the minimum, the majority of users go for four, thanks to speed, fault tolerance and storage capacity. It seems a bit backwards, but each extra hard drive in the array makes read and write speeds slower. Every drive you add also complicates data recovery if one of the drives fails.
On the other hand, the fewer drives in the array, the more storage capacity you lose. With three hard drives, for example, available capacity drops by 33%. If you connect three 1TB hard drives (3TB in total) in a RAID 5, you’ll end up with only 2TB of usable storage.
You still lose storage when you use more than the minimum number of disks, just not as much. RAID 5 always sacrifices the capacity of one connected drive, no matter how many are connected. The aim is to find a balance between storage needs, performance expectations and tolerance for risk.
RAID 5 requirement #2: the correct storage capacity
When working out how many drives a RAID 5 needs, you have to consider total storage capacity too. Whether it’s three hard drives or 16, they all need to have identical capacity.
The reason is that when connected drives differ in size, every drive acts as if it were the size of the smallest one. Wasting valuable storage is a big no-no, and you should avoid it wherever possible.
RAID 5 Requirement #3: A dedicated hardware controller
Software looks after some RAID configurations. Others rely on hardware to keep things running smoothly. For RAID 5, a hardware controller is strongly encouraged.
RAID 5 hardware controllers are physical chips, either added to the motherboard or sold as standalone expansion cards. They can calculate parity data before writing it across all the disks, which makes them valuable. Controllers also manage the physical space on each disk and lift the configuration’s performance by adding a disk cache.
RAID 5 Requirement #4: Fault tolerance
Consider fault tolerance before you set up your RAID array. RAID 5 offers reasonable fault tolerance because it is designed to keep operating when a drive is down. And if you lose data as a result, you can piece together the missing information using data on the other drives in the parity.
Grasping this requirement is critical, because a RAID 5 system can only cope with the loss of a single drive, which isn’t the case for other RAID configurations. When multiple drives fail at the same time, the likelihood of recovering data is far lower. Recovery also gets more complicated and takes longer for each extra drive in the array.
The number of drives you pick for your RAID 5 is important because it directly affects fault tolerance.
If you’re dealing with a failed RAID 5, or trouble with any other RAID configuration, we can help work out whether your data is recoverable. If your RAID array fails, contact DriveSavers right away.

