RAID 5 Requirements: 4 Things to Know Before You Build

What can you do if you run a small or medium-sized business, or work as a freelancer or consultant, and can’t stretch to the capital outlay for high-capacity servers? You still want drives with fast read and write speeds and plenty of storage, yet the cost puts it out of reach. Depending on what you need, the answer could be RAID 5. So what are the RAID 5 requirements?
What is a RAID?
A Redundant Array of Independent Disks (RAID) is a storage approach that is an excellent way to get the most from the performance of several hard drives. As we’ve covered before, RAID configurations use software and hardware to make a group of hard drives work as one, giving you an affordable, high-performance data storage system.
Each type of RAID has its own advantages, drawbacks and requirements. Here we look at RAID 5, which is a popular option and fairly simple to set up. RAID 5 delivers lightning-fast read times, and if a RAID 5 disk does fail, data recovery is possible. This is because the array breaks data into small pieces and spreads them across the connected drives. Dividing and storing the data in this way is known as parity.
There are, of course, a few things to know before you arrange your hard drives into a RAID 5. Every array needs certain conditions in order to work well, and RAID 5 is no exception. So what should you know before you set up a RAID 5 hard drive configuration?
The 4 RAID 5 Requirements You Should Know
RAID 5 requirement #1: the right number of drives
How many physical disks do you need for RAID 5? A RAID 5 setup can connect anywhere from three to 16 drives, though four is the number most often used.
Three is the minimum, but most people choose four because of speed, fault tolerance and storage capacity. It’s slightly counterintuitive, but the more hard drives you connect to the array, the slower reads and writes become. Adding drives also makes data recovery more complicated if one of them fails.
At the same time, the fewer drives in the array, the greater the share of storage you give up. With three drives, for instance, available capacity falls by 33%. Connect three 1TB hard drives (3TB in total) in RAID 5 and you will have just 2TB of usable space.
You still lose some storage when you go above the minimum number of disks, but the loss is less significant. A RAID 5 always gives up the capacity of one connected drive, however many disks there are. The trick is to balance your storage needs, your performance expectations and how much risk you can accept.
RAID 5 Requirement #2: The right storage capacity
Working out how many drives a RAID 5 needs goes hand in hand with looking at overall storage capacity. Whether you connect three hard drives or 16, they must all have the same capacity.
Why? If the connected drives are not the same size, each will behave as though it has the capacity of the smallest drive in the array. Wasting valuable storage is a definite no-no and should be avoided at all costs.
RAID 5 Requirement #3: A dedicated hardware controller
Some RAID configurations depend on software to manage and maintain them, while others use hardware to make sure they run properly. For RAID 5, a hardware controller is strongly recommended.
A RAID 5 hardware controller is a physical chip, either fitted to the motherboard or supplied as a separate expansion card. Controllers are useful because they can calculate parity data before it is written across all the disks. They manage the physical space on each disk and improve the configuration’s performance by providing an extra disk cache.
RAID 5 Requirement #4: Fault tolerance
Think carefully about fault tolerance before you configure your RAID array. RAID 5 has decent fault tolerance, since the system is built to keep working even when one drive is down. If you do lose data as a result, you can rebuild the missing information from the other drives in the parity set.
Understanding this requirement is vital because, unlike some other RAID configurations, a RAID 5 can only withstand the loss of one drive. If several drives fail at once, the chances of recovering data are much lower, and recovery becomes more complex and time-consuming with each drive you add to the array.
Choosing the right number of drives for your RAID 5 matters so much because the number of drives has a direct effect on fault tolerance.
If you have a failed RAID 5, or problems with any other RAID configuration, we can help establish whether your data can be recovered. If your RAID array fails, contact DriveSavers straight away!

