RAID 10 Data Storage
Standard RAID (redundant array of independent disks) levels comprise a basic set of RAID configurations that employ either striping, mirroring, or parity to create large reliable data stores from multiple general-purpose computer hard disk drives (HDDs).
RAID 10 (also known as RAID 1+0) is a nested or “hybrid” RAID configuration that provides the redundancy of RAID 1 (mirroring) with the read/write speeds of RAID 0 (striping).
Since RAID 10 provides both redundancy and performance, it is a great option for I/O-intensive applications including email & web servers, databases and operations that require high disk performance. It requires a minimum of four disks, and stripes data across mirrored pairs.
As long as one disk in each mirrored pair is functional, data can be retrieved. If two disks in the same mirrored pair fail, all data will be lost because there is no parity in the striped sets. In this case, data recovery is the only option to prevent permanent loss of data.
RAID 10 Failures
While the RAID 10 configuration can provide protection against and recovery from hardware defects or defective sectors/read errors (hard errors), it does not provide any protection against data loss due to catastrophic failures (fire, water), multiple disc failures, user error, software malfunction, or malware infection. For valuable data, RAID is only one building block of a larger data loss prevention and recovery scheme – it cannot replace a backup plan.
RAID 10 HARDWARE FAILURES
- Corrupted RAID 10 configuration
- Lightning, flood or fire damage
- Drive physical abuse
- RAID 10 hard disk drive (HDD) overheat
- Intermittent drive failure
- Media surface contamination
- Multiple drive failure
- Power spike
- Power supply burnout or failure
- RAID 10 controller failure
- RAID 10 corruption
- RAID 10 drive incompatibility
- RAID 10 array failed
- Vibration damage
- Damaged connector
- Manufacturer defect
- Power circuit malfunction
HUMAN ERROR
- Unintended or accidental deletion of files or records
- Reformatting of drives/array
- Reformatting of partitions
- Incorrect replacement of media components
- Mistakenly overwritten database files
- Employee sabotage
- Lost/forgotten password
- Overwritten files
- Overwritten RAID 10 config files
- Overwritten RAID 10 settings
- RAID 10 incorrect setup
- RAID 10 user error
RAID 10 SOFTWARE ISSUES
- Backup failures
- Computer virus or worm
- Corrupt files/data
- Damaged files or folders
- Directory corruption
- Firmware corruption
- Re-partition
- Server registry configuration error
- Missing partitions
- RAID 10 configuration error
- Reformatting
APPLICATION FAILURE
- Applications that are unable to run or load files
- Corrupted database data or other files
- Locked databases preventing access
- Deleted tables
RAID 10 Data Recovery
RAID 10 servers are usually extremely reliable and offer a comfortable amount of redundancy. However, like any RAID configuration, data loss is a real possibility as a result of drive failure both physical and logical. Most systems have a hot spare to immediately replace damaged drives, but two drives can fail in a RAID 10 set before the RAID has a chance to rebuild the damaged component.
Raid 10 data recovery software is available but even the best programs cannot fix most problems that cause RAID 10 data loss in the first place. Data recovery software isn’t likely to help in severe cases. DIY data recovery utilities can even make things worse and virtually impossible for even the best RAID 10 data recovery companies.
Our advise is simple. If you have encountered a RAID 10 failure resulting in potential data loss, give DriveSavers a call. Raid 10 data recovery is what we do! We are experts in the field with an extraordinary success rate backed by over 30 years as the leader in data recovery.
Our certified RAID 10 data recovery engineers have the in-depth knowledge and technical expertise that comes from over 30 years of data recovery experience, allowing us to achieve the highest success rate in the industry. DriveSavers Enterprise Systems Group specialises in recovering data from all operating systems and all types of high-capacity devices including redundant arrays of independent disks (RAID), network attached storage (NAS), storage area networks (SAN) and multi-disk servers. We routinely rescue lost databases, ERP accounting systems, mail servers and other mission-critical data for organisations of all sizes.
Because RAID devices are constructed with unique components and configurations depending on the manufacturer, it is imperative that our data recovery engineers have in-depth knowledge of the various proprietary metadata structures and hardware.
Technical alliances with RAID controller manufacturers have enabled our engineers to develop proprietary techniques, tools and technologies that aid in data recovery from RAID devices based on solid-state drives (SSDs), hard disk drives (HDDs) and more complex hybrid and tiered storage environments. All major Raid 10 manufacturers authorize our data recovery services so working with DriveSavers will not void your original warranty.
Extreme damage and data loss can result if any particulate matter enters an HDD. DriveSavers Certified ISO Class 5 Cleanroom is the most advanced data recovery Cleanroom in the industry. This dust-free, static-free, temperature– and humidity-controlled environment maximizes our data recovery successes on all storage devices by protecting the platters and electronic components on the drives from “killer particles” while they are open and vulnerable to damage.
RAID SERVER MAKES & MEDIA
- All HP ProLiant, LeftHand and 3PAR Series
- All Dell PowerEdge, PowerVault, EqualLogic, and Compellent Series
- IBM xSeries, Power Series (AIX, Linux) and storage subsystems
- Supermicro server and storage subsystems
- All Intel and AMD product lines
- SAN– and NAS-based RAIDs and standalone storage systems
- EMC and NetApp product lines